MIL-STD-810 - Delserro Engineering Solutions

MIL-STD-810 High Temperature Testing

Explore MIL-STD 810 Method 501 High Temperature Testing procedures and typical failures. DES is your trusted choice for MIL-STD-810 compliance.

MIL-STD-810 Low Pressure (Altitude) Testing

Discover comprehensive MIL-STD-810H Method 500.6 low pressure (altitude) testing services at Delserro Engineering Solutions.

What Exactly is MIL-STD 810?

MIL-STD 810 is a Department of Defense Test Method Standard for environmental engineering considerations and laboratory tests. It is the most popular Military specification used to conduct environmental testing of military products. It exists so as to ensure that products used for defense-related purposes meet very specific requirements with regard to ruggedness, durability, and performance. Given the fact that these products may be exposed to harsh or even extreme conditions, their reliability under stress is essential

MIL-STD 810, Method 516, Shock Testing Procedure V – Crash Hazard Shock

This is another part of a series of blog posts concerning the MIL-STD 810 Shock Section, Method 516. This blog was written with reference to MIL-STD-810G w/Change 1 dated 15 April 2014. DES has the experience and expertise to run your MIL-STD-810 test. For more information, please check out our DES shock testing services page and our other MIL-STD-810 shock testing blog articles: MIL-STD 810, Method 516, Shock Testing Overview MIL-STD 810, Method 516, Shock Testing Procedure I – Functional Shock MIL-STD 810, Method 516, Shock Testing Procedure II – Transportation Shock MIL-STD 810, Method 516, Shock Testing Procedure III…

MIL-STD 810, Method 516, Shock Testing Procedure IV – Transit Drop

MIL-STD 810, Method 516, Shock Testing Procedure III – Fragility

MIL-STD 810, Method 516, Shock Testing Procedure II – Transportation Shock

MIL-STD 810, Method 516, Shock Testing Procedure I – Functional Shock

This is part two of a series of blog posts concerning the MIL-STD 810 Shock Section, Method 516. This blog was written with reference to MIL-STD-810G w/Change 1 dated 15 April 2014. DES has the experience and expertise to run your MIL-STD-810 test. For more information, please check out our DES shock testing services page and our other MIL-STD-810 shock testing blog articles: MIL-STD 810, Method 516, Shock Testing Overview Shock testing according to Procedure I of MIL-STD 810, Method 516 is intended to test products while they are operating to see if any functional problems occur and to determine…

MIL-STD 810, Method 516, Shock Testing Overview

This is part one of a series of blog posts concerning the MIL-STD 810 Shock Section, Method 516. This blog was written with reference to MIL-STD-810G w/Change 1 dated 15 April 2014. DES has the experience and expertise to run your MIL-STD-810 test. For more information, please check out our DES shock testing services page. MIL-STD-810 is a public military test standard that is designed to assist in the environmental engineering considerations for product design and testing. For the purposes of this blog series we will focus on Method 516.7, Shock Testing. The purpose of shock testing is to: Evaluate…

Mixed Mode: Sine on Random Vibration Testing, RoR, SoRoR

Mixed Mode Vibration Testing is less common than Sinusoidal and Random Vibration Testing. However, it does have a special purpose for simulating specialized helicopter vibration or vibration from tracked vehicles such as tanks. The three mixed modes of vibration testing are: Sine-on-Random (SoR) Random-on-Random (RoR) Sine-on-Random-on-Random (SoRoR) Some common test standards that have specifications for Mixed Mode Vibration Testing are: MIL-STD-810 Department of Defense Test Method Standard for Environmental Engineering Considerations and Laboratory Tests RTCA DO-160 Environmental Conditions and Test Procedures for Airborne Equipment

← Older posts

Newer posts →